Page 709 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Drawer Slides
Single-Wall Drawer System

Grass Zargen and Z Box Drawer Systems - Technical Information

Adjustment Features for Zargen 6423, 6436, 6236, 6223, 6136 Adjustment Features for Z Box 6023, 6036, 6035
2
2 1 Height Adjustment:
1 Height Adjustment: Loosen screws 2 slightly.
Loosen screws 2 slightly. Adjust screw 1 (adjustment
Adjust screw 1 (adjustment +/-2 mm). Tighten screws 2. 1
+/-2 mm). Tighten screws 2. 1
2 Side Adjustment:
fixing
2 Side Adjustment: screw Loosen screws 2 slightly. 2
Loosen screws 2 slightly. Adjust front to required position
Adjust front to required position 2 (adjustment range ± 1.5 mm). 1
(adjustment range ± 1.5 mm). 1 Tighten screws 2. 2
Tighten screws 2.
2
After adjusting front panel, mount
fixing screw.

Built-in Stop
The integrated drawer stop
protects the drawer front
from impact during closing.
Furthermore, it acts as a shock extension
absorber and a self-alignment
feature for the drawer fronts. Weight Capacity
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
(no additional bumpers needed) The nominal weight capacity depends on the slide extension and is 8
listed on each page. Static weight capacity refers to the short-term
overload of the slide when not in motion. This short-term overload
factor also depends on the slide extension. These weights meet or
exceed ANSI/KCMA and ANSI/BHMA requirements.
Drawer Slides

304 (11 15/16") Cabinet Member
To simplify installation of the cabinet member, a unique double-hole pattern
270 (10 5/8") for 32 mm and 37 mm setback has been developed.
350 (13 3/4")
Installation with Wood Screws
With wood screws (#6 x 5/8" flat head phillips) the cabinet member is
400 (15 3/4")
96 (3 3/4") screwed directly on the end panel. To guarantee precise positioning,
440 (17 5/16") pre-center with a pilot drill. For wood screws, use the front section of the
double hole.
470 (18 1/2")
Installation with Euro Screws
510 (20 1/16") With Euro screws (flat head phillips) the cabinet member can be fastened
into a pre-drilled 32 mm hole system. See drawing to the left for all
550 (21 5/8") fastening positions.
32 (1 1/4") 32 (1 1/4")
37 (1 7/16")
192 (7 9/16") 192 (7 9/16") 96 (3 3/4")
Captive Rollers
To avoid tolerance problems, Grass slides are designed to eliminate side movement of the drawer.
After installation, the right drawer member blends perfectly with the right cabinet member for guidance;
the left side allows for cutting tolerance of the drawer and the cabinet components.
System Organization
The Zargen and Z Box systems solve all organizational requirements with regular drawers, inset
pull-outs, divider railings and more.
Tolerance adjustment Captive roller
(right side)

www.hafele.com/us FC 8.43