Page 1061 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Locks and Catches
Cabinet Locks

National Locks High Security

Drawer Note > Approved by the Woodworkers Institute (formerly WIC)
Through the use of a shifter, the 360º
28 key travel turns the cam 90º in either Note
(1 1/8") direction. Actual application determines Custom Master keying and General Master key systems available
which cam position is the locked upon request.
position. Each lock is furnished with an 2000 key changes are possible, special order 5 pin tumblers:
3 RH LH alternate cam for opposite cam turn. - Please include a key plan
(1/8") Door Door - Plan on 2–3 weeks to produce
32 (1 1/4") 32 (1 1/4")

→ C8102 and C8103 Cam Locks

C8103
shown → Keyed Different

> For drawer, left, or right hand applications
> 4 pin tumblers include 850 key changes
> Cam turns 90º, key turns 360º
> Material: Brass

Finish Mounting Length Material National No. Item No
type thickness
brushed flush 27 (1 1/16") 19 (3/4") C8102-KD-26D 235.10.400
chrome lipped/overlay 30 (1 3/16") 22 (7/8") C8103-KD-26D 235.10.300
satin flush 27 (1 1/16") 19 (3/4") C8102-KD-4 235.10.500
Solid lines show locked brass lipped/overlay 30 (1 3/16") 22 (7/8") C8103-KD-4 235.10.600
position of cam
Supplied With
2 Keys, 2 Cams, Spur washer, Rosette

R/H Drawer → Master Keyed, Keyed Different
Flush Lipped
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
10 overlay > Random key numbers only
(3/8")
L/H Drawer > Material: Brass-plated; Finish: brushed chrome
Position of shifter
on back of lock
Mounting type Length Material thickness National No. Item No.
Flush 27 (1 1/16") 19 (3/4") C8102-MKKD-26D 235.10.497
Lipped/overlay 30 (1 3/16") 22 (7/8") C8103-MKKD-26D 235.10.397
16 Supplied With
(5/8") 2 Keys, Strike plate, Screws
19 19
(3/4") (3/4") Note
C8102 C8103 Order master key separately, below.
→ Master Key → Replacement Keys
10

> For MKKD locks above > For locks: C8102, C8103, C8139, C8142,
> Material: Brass C8173, C8178 and C8179.
> Material: Brass
National No. Item No. Locks
D4299 210.02.209 Keying No. Item No.
101 210.02.201
→ Mounting Plate for Cam Locks 103 210.02.202
107 210.02.203
915 210.02.204
> Used where spur washer will not
embed into hard surfaces
> W x H: 56 x 32 mm (2 1/4"×1 1/4")
> Material: Steel

National No. Item No.
C2016-2C 210.02.081

www.hafele.com/us FC 10.39