Page 823 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Hinges and Stays
Institutional Hinges

Aximat 300 Single Pivot Hinge
®

> Sleek sophisticated design, only 5 mm (3/16") of knuckle is visible
> Hinge arm component available with pre-installed expanding
dowels for 5 mm (3/16") holes, or for screw attachment
> Hinge cup component available in screw mount or dowel mount
> Arm and cup clip together, no tools required
> For side panel thickness: 19 mm (3/4")
> For door thickness: up to 21 mm (13/16")
> Integrated catch keeps doors closed, no additional magnetic
catches required
3D adjustment > For single cabinets and storage walls
> Available in twin mounted version, 2 doors can be mounted on a
single hinge on a single side panel
Note #6 wood screws for hinge attachment are not included.
mm (") kg. (lbs.) x = max.
15 100 mm (4")
(5/8")
x
2500 25
270º (98 3/8") (55)
Drilling pattern for side panel Drilling pattern for cup
Dowel holed
chamfered 2 x 4 2000 20
Pilot hole 5 9.5 45 (78 3/4") (44)
Position of for #8 35 33 40%
the safety wood (1 1/4")
screw
screw, 8
(required) 32 or pilot hole 1500 15
for #8 18.5 Depth for #6 wood (59 1/8") (33)
screw
wood 13 mm 12.5 60%
screw
Full overlay Side by side 1000 10
37 19 mm (3/4") mounting (39 3/8") (22)
#6
Door overlay 15 mm +
knuckle 4 mm = 19 mm (3/4")
→ Cup 500 5
(19 3/4") (11)
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
6.5
> Screw mounted (1/4")
> Material: Zinc Recommended number
of hinges
Finish Item No. > Door widths up to 600 mm
(23 5/8")
matt nickel 344.06.800 > Door width should not
44
33
black 344.06.850 (1 3/4") (1 1/4") exceed height 9
→ Cup for 8 mm holes
6
(1/4")
> Dowel mounted Half overlay Half overlay & Door overlay 6.5 mm +
> Material: Zinc 12.5 mm (1/2") twin mounting knuckle 6 mm =
12.5 mm (1/2")
Finish Item No. → Arm
matt nickel 344.06.810 Hinges and Stays
black 344.06.860 > With pre-mounted expanding dowels for
5 mm (3/16") holes
→ Arm > Material: Zinc

> Full overlay Finish Overlay Opening Item No.
> Without screws angle
> Material: Zinc matt
nickel full 270º 344.06.920
Opening angle: Finish Item No. black full 270º 344.06.320
matt nickel 344.06.930 half 240º 344.06.921
black 344.06.980 matt twin 180º 344.06.902
nickel
inset 180º 344.06.903
Note
Flat head wood screws page 12.13 Twin mounted version requires 2 cups.

www.hafele.com/us FC 9.5