Page 630 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Sliding and Roller Shutter Systems
Pivoting Pocket Doors

WF/MF Systems

> Door thickness: max. 32 mm (1 1/4")
Min. pocket > Pocket width:
width
12 Max. Flat Head Door thickness: min. 16–22 mm (5/8"–7/8") = 45 mm (1 25/32")
Door thickness: min. 22–32 mm (7/8"–1 1/4") = 57 mm (2 1/4")
(15/32") #6
> Door height: WF System: max. 711 mm (28")
MF System: max. 813 mm (32")
35.2 88 > Recommended for entertainment systems, office furniture
(1 3/8") (3 15/32") systems and institutional furniture, where the wood follower strip
is finished to match the inside of the cabinet
84 Min. (3 5/16") > Material: Steel; Finish: black
Note
Customer selects metal follower or supplies wood follower.
Metal follower, see next page. Components listed on next page
are needed for each door.
2
Back- 35 (1 3/8") (3/32")
set 40 (1 9/16") Door thickness
2 9.5
(3/32") (3/8") 9

→ Ball Bearing Slide

Length Max. retraction Item No.
305 (12") 222 (8 3/4") 408.10.302
454 (17 7/8") 374 (14 23/32") 408.10.455
7 554 (21 13/16") 474 (18 21/32") 408.10.553

Pan Head
Sliding and Roller Shutter Systems
#8

Flat Head
#8

Metal follower

M4
Pan Head
#8 M4
Flat Head
#6

Flat Head Backset = Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
#8 Door thickness
+ 6
(1/4")
Wood follower
(fabricated by customer)
Maximum thickness = 1/2"
Backset =
Door thickness + 6
(1/4")

Flat head screws pages 12.7–12.8, 12.10, 12.13
Pan head screws pages 12.9–12.10
M4 screws page 12.17
FC 7.110 www.hafele.com/us