Page 1385 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Consumables and Tools
Adhesives

Titebond ®

→ Pro Heavy Duty Construction Adhesive → Weathermaster Sealant

> Ideal for bonding wood, metal, brick, marble, ceramic tile, > Solvent free
concrete, drywall and wet, frozen and treated lumber > Permanently flexible and watertight seal
> Designed for wet, frozen or treated lumber and ideal for metal, > Superior adhesion to most building materials
brick, concrete, ceramics and most large-panel substrates > Outperforms both silicone and urethane sealants
> Reduces the amount of nailing and helps eliminate squeaky floors > UV resistant
> Excellent water-resistance and permanently flexible > Will not yellow or crack
> Exceeds the performance requirements of the American Plywood > Mold and mildew resistant
Association AFG-01 > VOC-compliant
> Specification, ASTM D3498 and ASTM C557, HUD/FHA Use of > Passes ASTM C920 Type S Grade NS Class 50
Materials Bulletin #60 > Passes Federal Specification TT-S-00230C
APPLICATION GUIDELINES APPLICATION GUIDELINES
Application temperature: 0°F to 100°F Application temperature: Above 10°F
Service temperatures: -20°F to 120°F Service temperatures: -75°F to 250°F
Methods of application: Cartridge/caulking gun Methods of application: Cartridge/caulking gun
Coverage (maximum): Approximate length of bead according to Coverage (maximum): Approximate length of bead according to
bead diameter: bead diameter:
Container bead 1/8" bead 1/4" bead 3/8" Container bead 1/4" bead 3/8" bead 1/2"
10 oz. cartridge 123 ft. 30 ft. 13 ft. 10.1 oz. cartridge 32 ft. 13.5 ft. 7.5 ft.
Working time: Approx. 20–30 minutes for a 1/4” bead. Working time: Approx. 10–15 minutes for a 1/4” bead.
Working surfaces: Surfaces to be bonded should be clean and Working surfaces: For best results, surfaces should be clean,
free from excessive oil, grease, water, dirt or any other material dry and free from any material that may deter adhesion.
that may deter adhesion. Apply Titebond Heavy Duty Construction Cleanup: Clean tools and excess material with mineral spirits before
Adhesive to only one of the surfaces to be bonded. NOTE: When it dries. Scrape dried excess.
bonding subfloors or wet, frozen and treated lumber, nail or screw
as recommended by the American Plywood Association. LIMITATIONS
Cleanup: Tools/adhesive may be cleaned with acetone or mineral Extrudes slightly yellow and dries crystal clear. Air, caulk and surface
spirits. Follow solvent vendor’s precautions when using solvents. temperature should be above 10°F. If desired, it may be painted
Note with water-based paint immediately (wet-on-wet). For other types
Test solvent on a discreet area to make sure it will not mar or attack of paints, we recommend a compatibility test. If joint depth exceeds
the surface. 1/4”, use backing material. Not designed for continuous submersion
or use below the waterline. Do not use for aquariums.
LIMITATIONS
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
Not designed for continuous submersion or for use on polystyrene
foam, vinyl-coated drywall or rigid plastics. For polystyrene foam,
tub surrounds and most other plastics, we recommend Titebond
Interior/Exterior Construction Adhesive.

Consumables and Tools

Item No. Item No.
003.50.192 003.50.200

12

www.hafele.com/us FC 12.57