Page 1383 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Consumables and Tools
Adhesives

Titebond ®

→ Melamine Glue → Liquid Hide Glue

> Bonds melamine and vinyl coated products to porous materials > Ready-to-use form, requires no mixing, heating or stirring
> Thicker formulation for fewer runs and drips > Ideal for fine furniture or musical instrument repair
> Low odor and nonflammable > Excellent sandability
> Dries clear > Unaffected by finishes
> Excellent creep-resistance
APPLICATION GUIDELINES > Can be used to create a “crackling effect” on wood
Application temperature: Above 40˚F. > Slow set allows precise assembly
Open assembly time: 5 minutes (70˚F/50% RH)
Total assembly time: 10–15 minutes (70˚F/50% RH) APPLICATION GUIDELINES
Minimum required spread: Approximately 6 mils or 250 square Application temperature: Above 50˚F.
feet per gallon. Assembly time after glue application: 10 minutes (70˚F/50% RH)
Required clamping pressure: Enough to bring joints tightly Total assembly time: 20–30 minutes (70˚F/50% RH)
together (generally, 100–150 psi for softwoods, 125–175 psi for Minimum required spread: Approximately 6 mils or 250 square
medium woods and 175–250 psi for hardwoods). feet per gallon.
Methods of application: Easily spread with a roller spreader or brush, Required clamping pressure: Enough to bring joints tightly
or may be transferred to plastic bottles for finer gluing applications. together (generally, 100–150 psi for softwoods, 125–175 psi for
Cleanup: Damp cloth while glue is wet. Scrape off and sand medium woods and 175–250 psi for hardwoods).
dried excess. Methods of application: Can be applied by roller or dip spreader,
pressurized oil cans, plastic applicators, brush or stick.
LIMITATIONS Cleanup: Damp cloth while glue is wet. Scrape off and sand
Not intended for exterior use or where moisture is likely. Not for dried excess.
structural or load bearing applications. Vacuum pressing should
only be used for veneers up to 1/16” in thickness. Do not use when LIMITATIONS
temperature, glue or materials are below 40°F. If product has been Not intended for exterior use or where moisture is likely. Not for
frozen (gel-like appearance), it cannot be used. Read MSDS before use. structural or load bearing applications. For exterior applications use
NOTE: KEEP FROM FREEZING. Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue.
KEEP OUT OF THE REACH OF CHILDREN Freezing may not affect the function of the
product but may cause it to thicken. Agitation should restore product
to original form.
NOTE: KEEP FROM FREEZING.

BOND STRENGTH ASTM D-905 (On Hard Maple) BOND STRENGTH ASTM D-905 (On Hard Maple)
Substrates Strength psi % wood failure Temperature Strength psi % wood failure
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
Melamine/Melamine Lap Shears 329 100 Room Temperature 3,591 72
Melamine/Particle Board 329 100 150˚F Overnight 3,207 59

Consumables and Tools

Size Item No. Size Item No.
16 oz. 003.15.041 16 oz. 003.57.140
1 gallon 003.15.042
5 gallons 003.15.148

12

www.hafele.com/us FC 12.55