Page 1379 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Consumables and Tools
Adhesives

Titebond ®

→ Titebond II Extend Wood Glue → Extend Wood Glue
®
> Passes Type II water-resistance testing APPLICATION GUIDELINES
> Slower speed of set for longer open time Application temperature: Above 40˚F.
> Hot press and R-F compatible Assembly time after glue application: 15 minutes (70˚F/50% RH)
> Heat and solvent-resistant Minimum required spread: 7 mils (typical)
> Excellent sandability Required clamping pressure: Enough to bring joints tightly
together (generally, 30–80 psi for HPL, 100–150 psi for softwoods,
APPLICATION GUIDELINES 125–175 psi for medium woods and 175–250 psi for hardwoods).
Application temperature: Above 50˚F. Methods of application: Easily spread with a roller spreader or brush,
Assembly time after glue application: 15 minutes (70˚F/50% RH) or may be transferred to plastic bottles for finer gluing applications.
Minimum required spread: 7 mils (typical) Cleanup: Damp cloth while glue is wet. Scrape off dried excess.
Required clamping pressure: Enough to bring joints tightly
together (generally, 30–80 psi for HPL, 100–150 psi for softwoods, LIMITATIONS
125–175 psi for medium woods and 175–250 psi for hardwoods). Not intended for exterior use or where moisture is likely. For exterior
Methods of application: Easily spread with a roller spreader or brush, applications use Titebond II Premium Wood Glue. Freezing may
or may be transferred to plastic bottles for finer gluing applications. not affect the function of the product but may cause it to thicken.
Cleanup: Damp cloth while glue is wet. Scrape off dried excess. Agitation should restore product to original form. It is recommended
that Titebond Extend Wood Glue not be stored for extended periods
LIMITATIONS at temperatures lower than 40º.
Do not use for joints below the waterline or continuous submersion. NOTE: KEEP FROM FREEZING.
Freezing may not affect the function of the product but may cause
it to thicken. Agitation should restore product to original form.
Because of variances in the surfaces of treated lumber, it is a good
idea to test for adhesion.
NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY.
KEEP FROM FREEZING.

BOND STRENGTH ASTM D-905 (On Hard Maple) BOND STRENGTH ASTM D-905 (On Hard Maple)
Temperature Strength psi % wood failure Temperature Strength psi % wood failure
Room Temperature 3,844 48 Room Temperature 3,510 81
150˚F Overnight 1,820 6 150˚F Overnight 3,120 61

Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.

Consumables and Tools

Size Item No. Size Item No.
1 gallon 003.15.031 1 gallon 003.15.021
5 gallons 003.15.032 5 gallons 003.15.022

12

www.hafele.com/us FC 12.51