Page 1381 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Consumables and Tools
Adhesives

Titebond ®

→ Titebond II, Dark Wood Glue → Titebond , White Glue
®
®
> Same superior performance as Titebond II Premium Wood Glue > Fast set with a strong bond
®
> Formulated for darker wood > No solvent vapors for safety
> Passes ANSI Type II water-resistance > Water clean-up & non-toxic
> Designed for interior and exterior applications > Versatile
> Excellent sandability > Dries clear and colorless
> Unaffected by finishes > Sets faster than most other white glues
> Ideal for radio frequency (R-F) gluing systems
> Water clean-up APPLICATION GUIDELINES
> Ideal for wood, hardboard, particleboard, leather, cloth and Application temperature: Above 50˚F.
most porous materials Assembly time after glue application: 5 minutes (70˚F/50% RH)
Total assembly time: 10–15 minutes (70˚F/50% RH)
APPLICATION GUIDELINES Minimum required spread: 7 mils (typical)
Application temperature: Above 50˚F. Required clamping pressure: Enough to bring joints tightly
Assembly time after glue application: 5 minutes (70˚F/50% RH) together (generally, 30–80 psi for HPL, 100–150 psi for softwoods,
Total assembly time: 15 minutes (70˚F/50% RH) 125–175 psi for medium woods and 175–250 psi for hardwoods).
Minimum required spread: Approximately 6 mils or 250 square Methods of application: Easily spread with a roller spreader or brush,
feet per gallon. or may be transferred to plastic bottles for finer gluing applications.
Required clamping pressure: Enough to bring joints tightly Cleanup: Damp cloth while glue is wet. Scrape off and sand
together (generally, 100–150 psi for softwoods, 125–175 psi for dried excess.
medium woods and 175–250 psi for hardwoods).
Methods of application: Plastic bottles for fine applications; LIMITATIONS
glue may also be spread with a roller spreader or brush. Titebond White Glue is not intended for exterior use or where
Cleanup: Damp cloth while glue is wet. Scrape off and sand moisture is likely. For exterior applications use Titebond III Ultimate
dried excess. Wood Glue or Titebond II Premium Wood Glue. Not for structural
or load bearing applications. Do not use when temperature, glue,
LIMITATIONS or materials are below 50°F. Freezing may not affect the function
Not for continuous submersion or for use below the waterline. of the product but may cause it to thicken. Agitation should restore
Not for structural or load bearing applications. Do not use when product to original form. Read MSDS before use.
temperature, glue or materials are below 55°F. Freezing may not KEEP FROM FREEZING.
affect the function of the product but may cause it to thicken. KEEP OUT OF THE REACH OF CHILDREN
Agitation should restore product to original form. Because of
variances in the surfaces of treated lumber, it is a good idea to test
for adhesion.
Not FDA approved for indirect food contact. Read MSDS before use.
Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.
NOTE: KEEP FROM FREEZING.
KEEP OUT OF THE REACH OF CHILDREN
BOND STRENGTH ASTM D-905 (On Hard Maple) BOND STRENGTH ASTM D-905 (On Hard Maple)
Temperature Strength psi % wood failure Temperature Strength psi % wood failure
Room Temperature 3,600 77 Room Temperature 3,550 50
150˚F Overnight 1,600 10 150˚F Overnight 1,600 15

Consumables and Tools

Size Item No. Size Item No.
16 oz. 003.15.081 1 gallon 003.15.124
1 gallon 003.15.082
5 gallons 003.15.084
55 gallons 003.15.083 12

www.hafele.com/us FC 12.53