Page 1380 - Furniture Cabinetry Hardware-FloorKitchenResource.com

Consumables and Tools
Adhesives

Titebond ®

→ Titebond III, Ultimate Wood Glue → Titebond II, Fluorescent Wood Glue
®
®
> Waterproof – Passes ANSI/HPVA Type I Specification > Same superior performance as Titebond II Premium Wood Glue
®
> Superior strength > Detects unwanted glue residue when viewed under a black light
> Longer open time > Residual glue can be sanded off prior to applying stains
> Lower application temperature > Passes ANSI type II water-resistance
> Resists solvents, heat and mildew > Strong initial tack for superior strength
> Unaffected by finishes > Fast set & short clamp time
> Water clean-up & non-toxic > Water clean-up & non-toxic
> FDA approved for indirect food contact > Excellent sandability
> Sands easily without softening
> Safer than traditional waterproof glues APPLICATION GUIDELINES
Application temperature: Above 55˚F.
APPLICATION GUIDELINES Assembly time after glue application: 5 minutes (70˚F/50% RH)
Application temperature: Above 47˚F. Total assembly time: 10–15 minutes (70˚F/50% RH)
Open assembly time: 8–10 minutes (70˚F/50% RH) Minimum required spread: Approximately 6 mils or 250 square
Total assembly time: 20–25 minutes (70˚F/50% RH) feet per gallon.
Minimum required spread: Approximately 6 mils or 250 square Required clamping pressure: Enough to bring joints tightly
feet per gallon. together (generally, 100–150 psi for softwoods, 125–175 psi for
Required clamping pressure: Enough to bring joints tightly medium woods and 175–250 psi for hardwoods).
together (generally, 100–150 psi for softwoods, 125–175 psi for Methods of application: Easily spread with a roller spreader or brush,
medium woods and 175–250 psi for hardwoods). or may be transferred to plastic bottles for finer gluing applications.
Methods of application: Plastic bottles for fine applications; Cleanup: Damp cloth while glue is wet. Scrape off and sand
glue may also be spread with a roller spreader or brush. dried excess.
Cleanup: Damp cloth while glue is wet. Scrape off and sand
dried excess. LIMITATIONS
Not for continuous submersion or for use below the waterline.
LIMITATIONS Not for structural or load bearing applications. Do not use when
Not for continuous submersion or for use below the waterline. temperature, glue or materials are below 55°F. Freezing may not
Not for structural or load bearing applications. Use when affect the function of the product but may cause it to thicken.
temperature, glue and materials are above 45°F. Store product Agitation should restore product to original form. Because of variances
below 75°F. Storage above this temperature may cause product in the surfaces of treated lumber, it is a good idea to test for adhesion.
to thicken and reduce the usable shelf life. If thickened, shake Read MSDS before use.
vigorously by firmly tapping the bottle on a hard surface until product NOTE: KEEP FROM FREEZING.
is restored to original form. Because of variances in the surfaces of KEEP OUT OF THE REACH OF CHILDREN
treated lumber, it is a good idea to test for adhesion. For best results
gluing exterior doors or exotic and oily woods, please contact our
Technical Support Team at 1-800-347-4583. Read MSDS before use.
NOTE: KEEP FROM FREEZING.
KEEP OUT OF THE REACH OF CHILDREN
BOND STRENGTH ASTM D-905 (On Hard Maple) BOND STRENGTH ASTM D-905 (On Hard Maple)
Temperature Strength psi % wood failure Temperature Strength psi % wood failure
Room Temperature 4,000 57 Room Temperature 3,750 72
150˚F Overnight 800 0 150˚F Overnight 1,750 6
Consumables and Tools Dimensional data not binding. Dimensions in mm, inches are approximate. We reserve the right to alter specifications without notice.

Size Item No. Size Item No.
1 gallon 003.15.061 1 gallon 003.15.013
12 2.15 gallons 003.15.063 5 gallons 003.15.014
5 gallons
003.15.062

FC 12.52 www.hafele.com/us